Triple Key Hollow Stem Auger 3 1 / 4inch
Deskripsi Produk
Triple Key Hollow Stem Auger 3 1 / 4inch
Semua 3 1/4 \"(83mm) Triple Key Hollow Stem Augers menampilkan desain penerbangan hardfaced kontinu, tebal 3/8\" (9.5mm) di tepi luar dengan pitch 5 \"(117mm). Sendi alat dibuat dari 4142 baja paduan dan fitur koneksi baut ganda.
| Deskripsi | Lbs. | Kg | |
| Bagian Auger. | |||
| 1 | 3 1/4 \"(83mm) TK Hollow Stem Auger 3 1/4\" (83mm) I.D. x 6 5/8 \"(169mm) O.D. x 5 '(1525mm) | 81 | 36.7 |
| 2 | 3 1/4 \"(83mm) tk drive topi dengan 1 5/8\" (41mm) hex pin | 21 | 9.5 |
| 2 | 3 1/4 \"(83mm) tk drive topi dengan 2\" (51mm) hex pin | 25 | 11.3 |
| 3 | # 3 Kacang & Baut Untuk Adaptor Rod-to-Cap | 0.9 | 0.4 |
| 4 | 3 1/8 \"(79mm) konektor bit pilot (AW Box - 4 thd n-rod box) | 11 | 5 |
| 4 | 3 1/8 \"(79mm) konektor bit pilot (AWJ Box - 4 kotak batang N-Rod) | 12 | 5.4 |
| 4 | 3 1/8 \"(79mm) Konektor Poter Bit (NW Box - 4 Kotak THD N-Rod) | 8 | 3.6 |
| 4 | 3 1/8 \"(79mm) konektor bit pilot (Kotak NWJ - 4 kotak batang N-Rod) | 11 | 5 |
| 5 | Adaptor Rod-to-Cap - AW PIN | 3 | 1.4 |
| 5 | Adaptor Rod-to-Cap - PIN AWJ | 3 | 1.4 |
| 5 | Adaptor Rod-to-Cap - PIN NW | 7 | 3.2 |
| 5 | Adaptor Rod-to-Cap - PIN NWJ | 6 | 2.7 |
| 6 | AW Bor Rod - 5 '(1524mm) | 21 | 9.5 |
| 6 | AWJ Drill Rod - 5 '(1524mm) | 23 | 10.4 |
| 6 | NW Drill Rod - 5 '(1524mm) | 31 | 14.1 |
| 6 | NWJ Drill Rod - 5 '(1524mm) | 35 | 15.9 |
| Bagian Perbaikan Auger | |||
| 1a. | 3 1/4 \"(83mm) sendi alat tk pin | 6 | 2.7 |
| 1b | 3 1/4 \"(83mm) sendi kotak kotak TK | 5 | 2.3 |
| 7 | Baut kunci Auger ALB1 | 0.3 | 0.1 |
| 8 | ABN1 Auger Bushing Nut | 0.2 | 0.1 |
| 9 | Tombol Drive Auger ADK1 | 0.3 | 0.1 |
| Pemotong auger dan bit pilot | |||
| 10 | 3 1/4 \"(83mm) TK Blade Cutterhead - 7 1/2\" (190mm) O.D. | 11 | 5 |
| 10 | 3 1/4 \"(83mm) TK Spade Cutterhead - 7 1/2\" (190mm) O.D. | 12 | 5.5 |
| 10 | 3 1/4 \"(83mm) TK Blade / Bullet Cutterhead - 7 1/2\" (190mm) O.D. | 14 | 6.4 |
| 10 | 3 1/4 \"(83mm) TK Spade / Bullet Cutterhead - 7 1/2\" (190mm) O.D. | 12 | 5.5 |
| 10 | 3 1/4 \"(83mm) TK Bullet Cutterhead - 7 1/2\" (190mm) O.D. | 12 | 5.5 |
| 10 | 3 1/4 \"(83mm) TK 5-T Cutterhead - 7 1/2\" (190mm) O.D. | – | – |
| 11 | 3 1/8 \"(79mm) apex pilot bit, pin 4-thd n-rod | 2.5 | 1.3 |
| 11 | 3 1/8 \"(79mm) Poter Bit, Pin 4-Thrd N-Rod | 5 | 2.3 |
Untuk informasi lebih lanjut silahkan hubungi:
Skype: ROSCHEN. Alat, ROSCHEN _ Group
WeChat: + 86-137 6419 5009; + 86-135 8585 5390
WhatsApp: + 86-137 6419 5009; + 86-135 8585 5390
Email: roschen@roschen.com; roschen@roschen.net.
Situs web: http://www.roschen.com; http://www.roschen.net.
http://www.roschen.cn; http://www.roschendrill.com